LogiCORE IP Serial RapidIO Gen 2

Overview

Product Description

The LogiCORE™ IP Serial RapidIO Gen 2 Endpoint solution, designed to RapidIO Gen 2.1 specification, comprises of a highly flexible and optimized Serial RapidIO Physical Layer core and a Logical (I/O) and Transport Layer core. This IP solution is provided in netlist form with supporting example design code. The Gen 2 IP supports 1x, 2x, and 4x lane widths. It comes with a configurable buffer design, reference clock module, reset module, and configuration fabric reference design, which allows complete flexibility in selection functional blocks needed for a given application. This solution supports Verilog design environment. This IP core utilizes AXI-4 Streaming interface for data path and AXI-4 Lite interface for configuration (maintenance) transactions. This core is designed to ensure predictable timing, thereby significantly reducing engineering time investment and allowing resources to be focused on user-specific application logic.

For Serial RapidIO Gen 1.3 (with extensions for Gen 2 5G line rates) LogiCORE IP, please visit Serial RapidIO LogiCORE IP


Key Features and Benefits

  • 1x, 2x, & 4x Serial PHY - supports Artix™ 7, Kintex™ 7, Zynq™ 7000, Virtex™ 7, and Virtex 6 FPGAs
  • 1x, 2x & 4x Serial PHY - supports 1.25, 2.5, 3.125, 5.0, and 6.25 Gbps line speed
  • Supports IDLE1 and IDLE2 sequence
  • Supports Packet Retry, stomp, transmission error recovery, throttle-based flow control and CRC
  • Support for 8/16 bit device IDs, programmable source ID on all outgoing packets
  • Support for priority based re-transmit suppression
  • Independently configurable 8/16/32 packet deep TX and RX buffer depths
  • AXI4-Stream interface for Data path and AXI4-Lite for the configuration Interface

Resource Utilization


Support

Documentation

Featured Documents

Default Default Title Document Type Date