Zynq UltraScale+ MPSoC ZCU106 Evaluation Kit
by: AMD
The ZCU106 Evaluation Kit enables designers to jumpstart designs for video conferencing, surveillance, Advanced Driver Assisted Systems (ADAS) and streaming and encoding applications.
Overview
Product Description
The ZCU106 Evaluation Kit enables designers to jumpstart designs for video conferencing, surveillance, Advanced Driver Assisted Systems (ADAS) and streaming and encoding applications. This kit features a Zynq™ UltraScale+™ MPSoC EV device and supports all major peripherals and interfaces, enabling development for a wide range of applications. The included ZU7EV device is equipped with a quad-core Arm® Cortex®-A53 applications processor, dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+ programmable logic.
Key Features & Benefits
- Optimized for quick application prototyping with Zynq UltraScale+ MPSoC
- Integrated video codec unit supports H.264/H.265
- HDMI video input and output
- PCIe® Endpoint Gen3x4, USB3, DisplayPort & SATA
- DDR4 SODIMM – 72-bit attached to processor subsystem
- DDR4 Component – 64-bit attached to programmable logic
- 2x SFP+ cages
- 2x FPGA mezzanine card (FMC) interfaces for I/O expansion
Featured AMD Devices
Featuring the Zynq UltraScale+ XCZU7EV-2FFVC1156 MPSoC
| System Logic Cells (K) | 504 |
|---|---|
| Memory | 38Mb |
| DSP Slices | 1,728 |
| Video Codec Unit | 1 |
| Maximum I/O Pins | 464 |
Product Information
Board Features
Featuring the Zynq UltraScale+ XCZU7EV-2FFVC1156 MPSoC
Configuration
- Onboard JTAG circuitry to enable configuration over USB
- Dual quad-SPI flash memory
- Boot from SD card
Memory
- PS DDR4 72-bit SODIMM
- PL DDR4 component
- Quad-SPI flash
- SD card slot
Control & I/O
- 6x directional pushbuttons
- DIP switches
- PMBUS & System Controller MSP430 for power, clocks, and I2C bus switching
- USB2/3
Expansion Connectors
- 2x FMC-HPC connectors
- 2 Pmod headers
Communication & Networking
- SDI (x1 GTH)
- AES3 audio connector
- SFP+ cage (2x 2GTH)
- SMA (x1 GTH)
- UART to USB bridge
- RJ-45 Ethernet connector
- SATA (1x GTR)
- PCIe Gen3 Endpoint (x4 GTH)
Display
- HDMI video input and output (x3 GTH)
- DisplayPort (2x GTR)
Clocking
- Programmable clocks
- System clocks, user clocks, jitter attenuated clocks
Power
- 12V wall adaptor or ATX
What's Inside
ZCU106 Evaluation Board
Access to a full seat of Vivado™ Design Suite: Design Edition
Node locked & Device-locked to the XCZU7EV MPSoC FPGA, with 1 year of updates
Ethernet Cable
USB Micro Cable
4-Port USB 3.0 Hub
ATX Power Supply Adapter Cable
Power Cord and Adapter
Resources
Design Tools
| Name | Description | License Type |
|---|---|---|
| Vivado Design Suite Design Edition | The AMD Vivado™ Design Suite is a revolutionary IP and System Centric design environment built from the ground up to accelerate the design for FPGAs and SoCs. | Node locked device-locked to the XCZU7EV MPSoC FPGA, with one year of updates |
| AMD SDK | Full suite of tools for embedded software development and debug targeting AMD platforms | Free |
| PetaLinux Tools | Configure, Build and Deploy Linux operating system to AMD platforms | Free |
Intellectual Property
| Name | Description | License Type |
|---|---|---|
| Memory Interface Generator (MIG) | MIG is a free software tool used to generate memory controllers and interfaces for AMD FPGAs. | No-Charge IP |
Additional Tools, IP and Resources
| Name | Product Category | Item | Description |
|---|---|---|---|
| Open Source | Software Tool | TeraTerm | One of many possible terminal emulators used for serial connection from your PC to the evaluation kit. |
| Power Advantage Tool | Software Tool | Power Advantage Tool - Zynq UltraScale+ MPSoC | The Power Advantage Tool is a demo designed to showcase the power features of the Zynq UltraScale+ MPSoC device. |
