Mercury 2 - FPGA DIP Board
by: MicroNova LLC
Mercury 2 is an ultra-compact 3" by 1" AMD Artix 7 FPGA development board. The convenient 64-pin DIP form-factor makes it easy to add an FPGA to a breadboard, protoboard, or to your own custom PCB design. Mercury 2 provides a complete FPGA solution, encapsulating all the required power, configuration, and I/O circuitry, leaving you to focus on your project.
Key Features and Benefits
- On-board high-efficiency switching regulators for 3.3V, 1.8V and 1.0V rails
- Powered from Micro USB input or external 4.5 - 5.5V regulated power source
- 6-pin header for direct JTAG interface to the Artix 7 FPGA
- On-board Microchip LAN8720A 10/100 Ethernet PHY
- 3x User LEDs
- 10x FPGA-direct high speed IO pins
- 40x 5-volt tolerant IO pins provided by 2x TI SN74CB3T16210 bus switches
- Artix 7 internal XADC 1MSPS , 12-bit ADC, accessible on dedicated ADC input or mappable to FPGA-direct IO
- Microchip MCP 4812 2-channel, 225 KHz, 10-bit DAC
- Microchip MCP 3008 8-channel, 200 KSPS, 10-bit ADC
- 4Mbit (512K x 8-bit) or 16Mbit (2M x 8-bit) 10ns asynchronous SRAM
- 32Mbit SPI configuration / user Flash
- 50MHz MEMS oscillator (±50ppm)
- FTDI FT2232H 480Mbps USB 2.0 interface (Channel A: device configuration and debugging, Channel B: user-configurable interface between the FPGA and host for high-speed data transfer)
- Artix 7 FPGA (XC7A35T or XC7A100T)
What's Included
- Mercury 2 FPGA Development Board