Analog Discovery 2: 100MS/s USB Oscilloscope, Logic Analyzer and Variable Power Supply

Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by AMD University Program, Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab. The analog and digital inputs and outputs can be connected to a circuit using simple wire probes; alternatively, the Analog Discovery BNC Adapter and BNC probes can be used to connect and utilize the inputs and outputs. Driven by the free WaveForms 2015 (Mac, Linux and Windows Compatible) software, Analog Discovery 2 can be configured to work as any one of several traditional instruments.


Key Features and Benefits

  • Two programmable power supplies (0…+5V , 0…-5V): 250mW max for each supply or 500mW total when powered through USB, or 700mA max or 2.1W max for each supply when using an external wall power supply
  • Digital Bus Analyzers (SPI, I²C, UART, Parallel)
  • Spectrum Analyzer – power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.)
  • Network analyzer – Bode, Nyquist, Nichols transfer diagrams of a circuit. Range: 1Hz to 10MHz
  • Single channel voltmeter (AC, DC, ±25V)
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS)
  • 16-channel virtual digital I/O including buttons, switches, and LEDs – perfect for logic training applications
  • 16-channel pattern generator (3.3V CMOS, 100Msample/sec)
  • 16-channel digital logic analyzer (3.3V CMOS, 100Msample/sec)
  • Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals
  • Two-channel arbitrary function generator (±5V, 14-bit, 100Msample/sec, 20MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
  • Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100Msample/sec, 30MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)

What's Included

  • 5-pack of 6-pin male headers
  • Analog Discovery 2
  • One 2x15 flywire signal cable assembly
  • One USB A to micro B programming cable
  • One ferrite cable snap-on
  • One regular-sized project box (without sticker sheet)

Featured Documents