TE0720 Starter Kit
The Trenz Electronic Starter Kit TE0720-03-1CF-S consists of a TE0720-03-1CFA module on a TE0703 carrier board including heatsink. Supplied with a 5 V power supply, two VG96 connectors (DIN 41612), a 16 GByte micro SD card and an USB cable.
The Trenz Electronic TE0720-03-1CFA are SoC modules with commercial temperature range integrating a AMD Zynq Z020, a gigabit Ethernet transceiver, 1 GByte DDR3 SDRAM, 8 GByte e.MMC, 64 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Key Features and Benefits
- AMD XC7Z020-1CLG484C
- ARM dual-core Cortex-A9 MPCore
- 10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY), SGMII accessible on a board-to-board connector
- 32-Bit-wide 1 GByte DDR3 SDRAM
- 32 MByte SPI Flash memory (for configuration and operation)
- 4 GByte e-NAND (up to 32 GByte)
- 152 FPGA I/O's (75 LVDS pairs possible) and 14 MIO's available on board-to-board connectors
What's Included
- Depending on the customer design, additional cooling might be required.
- Other assembly options for cost or performance optimization plus high volume prices available on request.