TE0713
The Trenz Electronic TE0713 is an industrial-grade FPGA module integrating a AMD Artix 7 100T/200T FPGA, USB 3.0 to FIFO bridge, 1 GByte of DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.
Trenz Electronic modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among them. All this on a tiny footprint, smaller than a credit card, at the most competitive price.
There are different base boards available for this module. Latest documentation, design support files and reference designs with source files are available for download free of charge.
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Key Features and Benefits
- AMD Artix 7 (15T to 200T) SoM
- Both industrial and commercial temperature ranges available
- Rugged for high shock and high vibration resistance
- 1 GByte DDR3L 32-bit SDRAM
- 32 MByte QSPI Flash memory (with XiP support)
- USB 3.0 to FIFO interface bridge
- Programmable clock quad generator
- GTP transceiver clock (default 125 MHz)
- Fabric clock (default 200 MHz)
- Plug-on module with 2 x 100-pin and 1 x 60-pin high-speed hermaphroditic strips
- 152 FPGA I/O's (75 differential pairs) available via B2B connectors
- 4 GTP (multi Gigabit transceiver) lanes
- On-board high-efficiency DC-DC converters
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- User configurable LED
- Evenly-spread supply pins for good signal integrity.
What's Included
- Other assembly options for cost or performance optimization plus high volume prices available on request.