The following base platforms are added to Vitis Installer. You can use them directly after installing Vitis.
Embedded platform source files and build instructions can be found at AMD GitHub.
The ‘common image’ packages below contain a prebuilt Linux kernel and root file system that can be used with any Zynq™, Zynq™ MP or Versal board for embedded Vitis platform developers.
These files need to be copied to an SD flash card along with the platform specific boot image (boot.bin) available from the Vitis™ Embedded Platform page.
Also included is the ‘sysroot’ required for embedded Vitis platform application development. The sdk.sh script must to be used to setup the compressed Yocto Project SDK on a Linux development host properly.
Note: PetaLinux Tools installation is not necessary to use the common images. The licenses and sources used to create the common image content is provided below.
Versal common image (TAR/GZIP - 1.26 GB)
MD5 SUM Value : 545a8eaa8b624162be7ca7021258c261
Versal common target licenses and sources (TAR/GZIP - 3.82 GB)
MD5 SUM Value : 543abddca2a34ff33663248f8548133c
Versal common sysroot licenses and sources (TAR/GZIP - 3.58 GB)
MD5 SUM Value : de57f6b557c7ee900dd38ad0af2663f9
ZYNQMP common image (TAR/GZIP - 2.13 GB)
MD5 SUM Value : bdc1a2c8cb833a084bf511c518e773e3
ZYNQMP common target licenses and sources (TAR/GZIP - 4.53 GB)
MD5 SUM Value : 738f47fe726026b5465f21a7fe7ed24f
ZYNQMP common sysroot licenses and sources (TAR/GZIP - 4.29 GB)
MD5 SUM Value : fb9367d98cf3c6a43bd5e8f604d23caa
Vitis software emulation for embedded platforms now require XRT on host machine