Current Time 0:00
Duration 0:00
Loaded: 0%
Stream Type LIVE
Remaining Time 0:00
 
1x
    • Chapters
    • descriptions off, selected
    • captions off, selected

        Lowest Core Voltage Offering In UltraScale+

        Showcasing the lowest core voltage offering in UltraScale+ portfolio to achieve 2.4X performance per watt compared to 7-series devices. Vlow option enables customers to choose 50% lesser power at 1.2x higher performance, 2X larger device or 1.6x higher performance for same power budget.

        Related Videos

        Accurate Logic & Signal Power Estimation In XPE

        Learn about one of the key accuracy improvements in XPE for UltraScale and UltraScale+ devices. Starting from XPE 2015.4, replaced 'fanout' logical representation with 'routing complexity' algorithm to address Logic & Signal power co-relation between XPE and Vivado Report Power.

        XPE For Early Thermal Analysis

        Walk through an early thermal analysis using XPE at various phases of the design cycle including the device selection, design creation and thermal management phases. Positioning the importance of thermal analysis and recommended use model for system reliability with emphasis on the importance of thermal simulation during design creation and system debug cycles.

        UltraScale architecture for the industry’s best utilization

        The UltraScale architecture, along with the Vivado Design Suite, introduce many innovations over traditional FPGA architectures that increase performance and reduce power consumption.

        DMA for PCI Express

        This video walks through the process of creating a PCI Express solution that uses the new 2016.1 DMA for PCI Express IP Subsystem. The first part of the video reviews the basic functionality of a DMAs in PCI Express systems. Next, the new DMA for PCI Express Subsystem features are explained. Finally, an IPI design using this new DMA IP is created and the design is put in hardware the Linux software driver and application are used to exercise traffic over the PCIe link.

        Xilinx 25G Interconnect: Kintex, Virtex and Zynq UltraScale+ Devices

        The breadth of interconnect running from 19 to 32Gb/s is quickly expanding. Learn how Xilinx UltraScale+™ FPGAs and MPSoCs enable the direct use of these interconnect, and how the KCU116 and VCU118 Evaluation Kits can jump start your transceiver based design.