No conjugation

Overview

32 bit complex by 32 bit complex using no conjugation

Functions
v2cacc80	lmac2_antisym (v2cacc80 acc, v16cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x input buffer .
v2cacc80	lmac2_antisym (v2cacc80 acc, v8cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x input buffer using small X input buffer.
v2cacc80	lmac2_antisym (v2cacc80 acc, v8cint32 xbuff, int xstart, unsigned int xoffsets, v8cint32 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x and y input buffers using small X input buffer.
v2cacc80	lmsc2_antisym (v2cacc80 acc, v16cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x input buffer .
v2cacc80	lmsc2_antisym (v2cacc80 acc, v8cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x input buffer using small X input buffer.
v2cacc80	lmsc2_antisym (v2cacc80 acc, v8cint32 xbuff, int xstart, unsigned int xoffsets, v8cint32 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x and y input buffers using small X input buffer.
v2cacc80	lmul2_antisym (v16cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply intrinsic function with pre-sub from x input buffer .
v2cacc80	lmul2_antisym (v8cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply intrinsic function with pre-sub from x input buffer using small X input buffer.
v2cacc80	lmul2_antisym (v8cint32 xbuff, int xstart, unsigned int xoffsets, v8cint32 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply intrinsic function with pre-sub from x and y input buffers using small X input buffer.
v2cacc80	lnegmul2_antisym (v16cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x input buffer .
v2cacc80	lnegmul2_antisym (v8cint32 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x input buffer using small X input buffer.
v2cacc80	lnegmul2_antisym (v8cint32 xbuff, int xstart, unsigned int xoffsets, v8cint32 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x and y input buffers using small X input buffer.

Function Documentation

v2cacc80 lmac2_antisym	(	v2cacc80	acc,
		v16cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x input buffer .

acc0 += z00*(x00 - y00)
acc1 += z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 16 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmac2_antisym	(	v2cacc80	acc,
		v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x input buffer using small X input buffer.

acc0 += z00*(x00 - y00)
acc1 += z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmac2_antisym	(	v2cacc80	acc,
		v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8cint32	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-accumulate intrinsic function with pre-sub from x and y input buffers using small X input buffer.

acc0 += z00*(x00 - y00)
acc1 += z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 8 elements of type cint32
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmsc2_antisym	(	v2cacc80	acc,
		v16cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x input buffer .

acc0 -= z00*(x00 - y00)
acc1 -= z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 16 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmsc2_antisym	(	v2cacc80	acc,
		v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x input buffer using small X input buffer.

acc0 -= z00*(x00 - y00)
acc1 -= z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmsc2_antisym	(	v2cacc80	acc,
		v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8cint32	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-subtract intrinsic function with pre-sub from x and y input buffers using small X input buffer.

acc0 -= z00*(x00 - y00)
acc1 -= z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (2 x cint80 lanes)
xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 8 elements of type cint32
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmul2_antisym	(	v16cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply intrinsic function with pre-sub from x input buffer .

acc0 = z00*(x00 - y00)
acc1 = z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmul2_antisym	(	v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply intrinsic function with pre-sub from x input buffer using small X input buffer.

acc0 = z00*(x00 - y00)
acc1 = z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lmul2_antisym	(	v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8cint32	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply intrinsic function with pre-sub from x and y input buffers using small X input buffer.

acc0 = z00*(x00 - y00)
acc1 = z10*(x10 - y10)

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 8 elements of type cint32
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lnegmul2_antisym	(	v16cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x input buffer .

acc0 = -( z00*(x00 - y00) )
acc1 = -( z10*(x10 - y10) )

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lnegmul2_antisym	(	v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x input buffer using small X input buffer.

acc0 = -( z00*(x00 - y00) )
acc1 = -( z10*(x10 - y10) )

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v2cacc80 lnegmul2_antisym	(	v8cint32	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v8cint32	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex anti-symmetric multiply-negate intrinsic function with pre-sub from x and y input buffers using small X input buffer.

acc0 = -( z00*(x00 - y00) )
acc1 = -( z10*(x10 - y10) )

Returns

Returned accumulation vector (2 x cint80 lanes)

Parameters

xbuff	Input buffer of 8 elements of type cint32
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 8 elements of type cint32
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.