No conjugation

Overview

16 bit real by 32 bit complex using no conjugation

Functions
v4cacc80	lmac4_abs (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc80	lmac4_abs (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_max (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc80	lmac4_max (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_max (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_maxdiff (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc80	lmac4_maxdiff (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_maxdiff (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_min (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc80	lmac4_min (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmac4_min (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_abs (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc80	lmsc4_abs (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_max (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc80	lmsc4_max (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_max (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_maxdiff (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc80	lmsc4_maxdiff (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_maxdiff (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_min (v4cacc80 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc80	lmsc4_min (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmsc4_min (v4cacc80 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc80	lmul4_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc80	lmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc80	lmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc80	lmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc80	lnegmul4_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc80	lnegmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc80	lnegmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc80	lnegmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc80	lnegmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_abs (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc48	mac4_abs (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_max (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc48	mac4_max (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_max (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_maxdiff (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc48	mac4_maxdiff (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_maxdiff (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_min (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc48	mac4_min (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mac4_min (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_abs (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v8cacc48	mac8_abs (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_max (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v8cacc48	mac8_max (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_max (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_maxdiff (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v8cacc48	mac8_maxdiff (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_maxdiff (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_min (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v8cacc48	mac8_min (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mac8_min (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_abs (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc48	msc4_abs (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_max (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc48	msc4_max (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_max (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_maxdiff (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc48	msc4_maxdiff (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_maxdiff (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_min (v4cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc48	msc4_min (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	msc4_min (v4cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_abs (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v8cacc48	msc8_abs (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_max (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .
v8cacc48	msc8_max (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_max (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_maxdiff (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v8cacc48	msc8_maxdiff (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_maxdiff (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_min (v8cacc48 acc, v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .
v8cacc48	msc8_min (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	msc8_min (v8cacc48 acc, v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc48	mul4_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc48	mul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc48	mul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc48	mul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	mul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v8cacc48	mul8_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .
v8cacc48	mul8_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_max (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v8cacc48	mul8_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .
v8cacc48	mul8_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	mul8_min (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v4cacc48	negmul4_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v4cacc48	negmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v4cacc48	negmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v4cacc48	negmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v4cacc48	negmul4_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int xstep, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_abs (v64int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .
v8cacc48	negmul8_abs (v32int16 xbuff, int xstart, unsigned int xoffsets, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_max (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .
v8cacc48	negmul8_max (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_max (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_maxdiff (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .
v8cacc48	negmul8_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_maxdiff (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_min (v64int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .
v8cacc48	negmul8_min (v32int16 xbuff, int xstart, unsigned int xoffsets, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.
v8cacc48	negmul8_min (v32int16 xbuff, int xstart, unsigned int xoffsets, v32int16 ybuff, int ystart, v4cint32 zbuff, int zstart, unsigned int zoffsets)
	Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

Function Documentation

v4cacc80 lmac4_abs	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_abs	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_max	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_max	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_max	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_maxdiff	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_maxdiff	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_maxdiff	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_min	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_min	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmac4_min	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_abs	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_abs	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_max	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_max	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_max	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_maxdiff	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_maxdiff	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_maxdiff	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_min	(	v4cacc80	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_min	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmsc4_min	(	v4cacc80	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint80 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc80 lnegmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint80 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_abs	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_abs	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 += z00*abs(x00) + z01*abs(x01)
acc1 += z10*abs(x10) + z11*abs(x11)
acc2 += z20*abs(x20) + z21*abs(x21)
acc3 += z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_max	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_max	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_max	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 += z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 += z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 += z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_maxdiff	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_maxdiff	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_maxdiff	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_min	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_min	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mac4_min	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 += z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 += z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 += z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_abs	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 += z00*abs(x00)
acc1 += z10*abs(x10)
acc2 += z20*abs(x20)
acc3 += z30*abs(x30)
acc4 += z40*abs(x40)
acc5 += z50*abs(x50)
acc6 += z60*abs(x60)
acc7 += z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_abs	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 += z00*abs(x00)
acc1 += z10*abs(x10)
acc2 += z20*abs(x20)
acc3 += z30*abs(x30)
acc4 += z40*abs(x40)
acc5 += z50*abs(x50)
acc6 += z60*abs(x60)
acc7 += z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_max	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_max	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_max	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(max(x00 , y00))
acc1 += z10*(max(x10 , y10))
acc2 += z20*(max(x20 , y20))
acc3 += z30*(max(x30 , y30))
acc4 += z40*(max(x40 , y40))
acc5 += z50*(max(x50 , y50))
acc6 += z60*(max(x60 , y60))
acc7 += z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_maxdiff	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_maxdiff	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_maxdiff	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 += z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 += z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 += z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 += z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 += z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 += z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 += z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_min	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_min	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mac8_min	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-accumulate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 += z00*(min(x00 , y00))
acc1 += z10*(min(x10 , y10))
acc2 += z20*(min(x20 , y20))
acc3 += z30*(min(x30 , y30))
acc4 += z40*(min(x40 , y40))
acc5 += z50*(min(x50 , y50))
acc6 += z60*(min(x60 , y60))
acc7 += z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_abs	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_abs	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*abs(x00) + z01*abs(x01)
acc1 -= z10*abs(x10) + z11*abs(x11)
acc2 -= z20*abs(x20) + z21*abs(x21)
acc3 -= z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_max	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_max	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_max	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 -= z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 -= z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 -= z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_maxdiff	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_maxdiff	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_maxdiff	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_min	(	v4cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_min	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 msc4_min	(	v4cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 -= z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 -= z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 -= z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (4 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_abs	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 -= z00*abs(x00)
acc1 -= z10*abs(x10)
acc2 -= z20*abs(x20)
acc3 -= z30*abs(x30)
acc4 -= z40*abs(x40)
acc5 -= z50*abs(x50)
acc6 -= z60*abs(x60)
acc7 -= z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_abs	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*abs(x00)
acc1 -= z10*abs(x10)
acc2 -= z20*abs(x20)
acc3 -= z30*abs(x30)
acc4 -= z40*abs(x40)
acc5 -= z50*abs(x50)
acc6 -= z60*abs(x60)
acc7 -= z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_max	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_max	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_max	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(max(x00 , y00))
acc1 -= z10*(max(x10 , y10))
acc2 -= z20*(max(x20 , y20))
acc3 -= z30*(max(x30 , y30))
acc4 -= z40*(max(x40 , y40))
acc5 -= z50*(max(x50 , y50))
acc6 -= z60*(max(x60 , y60))
acc7 -= z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_maxdiff	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_maxdiff	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_maxdiff	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 -= z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 -= z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 -= z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 -= z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 -= z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 -= z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 -= z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_min	(	v8cacc48	acc,
		v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_min	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 msc8_min	(	v8cacc48	acc,
		v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-subtract intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 -= z00*(min(x00 , y00))
acc1 -= z10*(min(x10 , y10))
acc2 -= z20*(min(x20 , y20))
acc3 -= z30*(min(x30 , y30))
acc4 -= z40*(min(x40 , y40))
acc5 -= z50*(min(x50 , y50))
acc6 -= z60*(min(x60 , y60))
acc7 -= z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = z00*abs(x00) + z01*abs(x01)
acc1 = z10*abs(x10) + z11*abs(x11)
acc2 = z20*abs(x20) + z21*abs(x21)
acc3 = z30*abs(x30) + z31*abs(x31)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00)) + z01*(max(x01 , y01))
acc1 = z10*(max(x10 , y10)) + z11*(max(x11 , y11))
acc2 = z20*(max(x20 , y20)) + z21*(max(x21 , y21))
acc3 = z30*(max(x30 , y30)) + z31*(max(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0)

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 mul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00)) + z01*(min(x01 , y01))
acc1 = z10*(min(x10 , y10)) + z11*(min(x11 , y11))
acc2 = z20*(min(x20 , y20)) + z21*(min(x21 , y21))
acc3 = z30*(min(x30 , y30)) + z31*(min(x31 , y31))

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = z00*abs(x00)
acc1 = z10*abs(x10)
acc2 = z20*abs(x20)
acc3 = z30*abs(x30)
acc4 = z40*abs(x40)
acc5 = z50*abs(x50)
acc6 = z60*abs(x60)
acc7 = z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = z00*abs(x00)
acc1 = z10*abs(x10)
acc2 = z20*abs(x20)
acc3 = z30*abs(x30)
acc4 = z40*abs(x40)
acc5 = z50*abs(x50)
acc6 = z60*abs(x60)
acc7 = z70*abs(x70)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(max(x00 , y00))
acc1 = z10*(max(x10 , y10))
acc2 = z20*(max(x20 , y20))
acc3 = z30*(max(x30 , y30))
acc4 = z40*(max(x40 , y40))
acc5 = z50*(max(x50 , y50))
acc6 = z60*(max(x60 , y60))
acc7 = z70*(max(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*((x00 - y00 > 0) ? (x00 - y00):0)
acc1 = z10*((x10 - y10 > 0) ? (x10 - y10):0)
acc2 = z20*((x20 - y20 > 0) ? (x20 - y20):0)
acc3 = z30*((x30 - y30 > 0) ? (x30 - y30):0)
acc4 = z40*((x40 - y40 > 0) ? (x40 - y40):0)
acc5 = z50*((x50 - y50 > 0) ? (x50 - y50):0)
acc6 = z60*((x60 - y60 > 0) ? (x60 - y60):0)
acc7 = z70*((x70 - y70 > 0) ? (x70 - y70):0)

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 mul8_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = z00*(min(x00 , y00))
acc1 = z10*(min(x10 , y10))
acc2 = z20*(min(x20 , y20))
acc3 = z30*(min(x30 , y30))
acc4 = z40*(min(x40 , y40))
acc5 = z50*(min(x50 , y50))
acc6 = z60*(min(x60 , y60))
acc7 = z70*(min(x70 , y70))

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*abs(x00) + z01*abs(x01) )
acc1 = -( z10*abs(x10) + z11*abs(x11) )
acc2 = -( z20*abs(x20) + z21*abs(x21) )
acc3 = -( z30*abs(x30) + z31*abs(x31) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
xstep	Step between each column for selection in the xbuffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) + z01*(max(x01 , y01)) )
acc1 = -( z10*(max(x10 , y10)) + z11*(max(x11 , y11)) )
acc2 = -( z20*(max(x20 , y20)) + z21*(max(x21 , y21)) )
acc3 = -( z30*(max(x30 , y30)) + z31*(max(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) + z01*((x01 - y01 > 0) ? (x01 - y01):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) + z11*((x11 - y11 > 0) ? (x11 - y11):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) + z21*((x21 - y21 > 0) ? (x21 - y21):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) + z31*((x31 - y31 > 0) ? (x31 - y31):0) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v4cacc48 negmul4_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) + z01*(min(x01 , y01)) )
acc1 = -( z10*(min(x10 , y10)) + z11*(min(x11 , y11)) )
acc2 = -( z20*(min(x20 , y20)) + z21*(min(x21 , y21)) )
acc3 = -( z30*(min(x30 , y30)) + z31*(min(x31 , y31)) )

Returns

Returned accumulation vector (4 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_abs	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer .

acc0 = -( z00*abs(x00) )
acc1 = -( z10*abs(x10) )
acc2 = -( z20*abs(x20) )
acc3 = -( z30*abs(x30) )
acc4 = -( z40*abs(x40) )
acc5 = -( z50*abs(x50) )
acc6 = -( z60*abs(x60) )
acc7 = -( z70*abs(x70) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_abs	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the absolute value in the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*abs(x00) )
acc1 = -( z10*abs(x10) )
acc2 = -( z20*abs(x20) )
acc3 = -( z30*abs(x30) )
acc4 = -( z40*abs(x40) )
acc5 = -( z50*abs(x50) )
acc6 = -( z60*abs(x60) )
acc7 = -( z70*abs(x70) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to the x buffer. LSB apply to first lane
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_max	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer .

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_max	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(max(x00 , y00)) )
acc1 = -( z10*(max(x10 , y10)) )
acc2 = -( z20*(max(x20 , y20)) )
acc3 = -( z30*(max(x30 , y30)) )
acc4 = -( z40*(max(x40 , y40)) )
acc5 = -( z50*(max(x50 , y50)) )
acc6 = -( z60*(max(x60 , y60)) )
acc7 = -( z70*(max(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_maxdiff	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer .

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_maxdiff	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the maximum difference between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*((x00 - y00 > 0) ? (x00 - y00):0) )
acc1 = -( z10*((x10 - y10 > 0) ? (x10 - y10):0) )
acc2 = -( z20*((x20 - y20 > 0) ? (x20 - y20):0) )
acc3 = -( z30*((x30 - y30 > 0) ? (x30 - y30):0) )
acc4 = -( z40*((x40 - y40 > 0) ? (x40 - y40):0) )
acc5 = -( z50*((x50 - y50 > 0) ? (x50 - y50):0) )
acc6 = -( z60*((x60 - y60 > 0) ? (x60 - y60):0) )
acc7 = -( z70*((x70 - y70 > 0) ? (x70 - y70):0) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_min	(	v64int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer .

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 64 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul8_min	(	v32int16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		v32int16	ybuff,
		int	ystart,
		v4cint32	zbuff,
		int	zstart,
		unsigned int	zoffsets
	)

Complex multiply-negate intrinsic function after computing the minimum between the selected lanes from the input buffer using small X input buffer.

acc0 = -( z00*(min(x00 , y00)) )
acc1 = -( z10*(min(x10 , y10)) )
acc2 = -( z20*(min(x20 , y20)) )
acc3 = -( z30*(min(x30 , y30)) )
acc4 = -( z40*(min(x40 , y40)) )
acc5 = -( z50*(min(x50 , y50)) )
acc6 = -( z60*(min(x60 , y60)) )
acc7 = -( z70*(min(x70 , y70)) )

Returns

Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type int16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
ybuff	Right input buffer of 32 elements of type int16
ystart	Starting position offset applied to all lanes for input from Y buffer.
zbuff	Input buffer of 4 elements of type cint32
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane

Note

• For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
• Parameter 'zstart' must be a compile time constant.