Overview

16 bit complex by 16 bit complex using Z buffer conjugation

Functions
v8cacc48	mac4_sym_uct_nc (v8cacc48 acc, v32cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

v8cacc48	mac4_sym_uct_nc (v8cacc48 acc, v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

v8cacc48	mac4_sym_uct_nc (v8cacc48 acc, v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, v16cint16 ybuff, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

v8cacc48	msc4_sym_uct_nc (v8cacc48 acc, v32cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

v8cacc48	msc4_sym_uct_nc (v8cacc48 acc, v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

v8cacc48	msc4_sym_uct_nc (v8cacc48 acc, v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, v16cint16 ybuff, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

v8cacc48	mul4_sym_uct_nc (v32cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

v8cacc48	mul4_sym_uct_nc (v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

v8cacc48	mul4_sym_uct_nc (v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, v16cint16 ybuff, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

v8cacc48	negmul4_sym_uct_nc (v32cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

v8cacc48	negmul4_sym_uct_nc (v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

v8cacc48	negmul4_sym_uct_nc (v16cint16 xbuff, int xstart, unsigned int xoffsets, int xstep, v16cint16 ybuff, int ystart, int uct_col, int uct_shift, v8cint16 zbuff, int zstart, unsigned int zoffsets, int zstep)
	Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

Function Documentation

v8cacc48 mac4_sym_uct_nc	(	v8cacc48	acc,
		v32cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

acc0 += cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 += cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 += cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 += cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 mac4_sym_uct_nc	(	v8cacc48	acc,
		v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

acc0 += cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 += cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 += cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 += cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 mac4_sym_uct_nc	(	v8cacc48	acc,
		v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16cint16	ybuff,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-accumulate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

acc0 += cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 += cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 += cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 += cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 16 elements of type cint16
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 msc4_sym_uct_nc	(	v8cacc48	acc,
		v32cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

acc0 -= cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 -= cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 -= cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 -= cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 32 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 msc4_sym_uct_nc	(	v8cacc48	acc,
		v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

acc0 -= cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 -= cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 -= cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 -= cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 msc4_sym_uct_nc	(	v8cacc48	acc,
		v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16cint16	ybuff,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-subtract intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

acc0 -= cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 -= cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 -= cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 -= cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

acc	Incoming accumulation vector (8 x cint48 lanes)
xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 16 elements of type cint16
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 mul4_sym_uct_nc	(	v32cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

acc0 = cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 = cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 = cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 = cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 mul4_sym_uct_nc	(	v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

acc0 = cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 = cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 = cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 = cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 mul4_sym_uct_nc	(	v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16cint16	ybuff,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

acc0 = cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01)
acc1 = cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11)
acc2 = cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21)
acc3 = cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31)
acc4 = y0uct_select << uct_shift
acc5 = y1uct_select << uct_shift
acc6 = y2uct_select << uct_shift
acc7 = y3uct_select << uct_shift

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 16 elements of type cint16
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul4_sym_uct_nc	(	v32cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer .

acc0 = -( cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01) )
acc1 = -( cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11) )
acc2 = -( cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21) )
acc3 = -( cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31) )
acc4 = y0uct_select << uct_shift )
acc5 = y1uct_select << uct_shift )
acc6 = y2uct_select << uct_shift )
acc7 = y3uct_select << uct_shift )

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 32 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul4_sym_uct_nc	(	v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x input buffer using small X input buffer.

acc0 = -( cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01) )
acc1 = -( cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11) )
acc2 = -( cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21) )
acc3 = -( cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31) )
acc4 = y0uct_select << uct_shift )
acc5 = y1uct_select << uct_shift )
acc6 = y2uct_select << uct_shift )
acc7 = y3uct_select << uct_shift )

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

v8cacc48 negmul4_sym_uct_nc	(	v16cint16	xbuff,
		int	xstart,
		unsigned int	xoffsets,
		int	xstep,
		v16cint16	ybuff,
		int	ystart,
		int	uct_col,
		int	uct_shift,
		v8cint16	zbuff,
		int	zstart,
		unsigned int	zoffsets,
		int	zstep
	)

Complex symetric multiply-negate intrinsic function with unit center-tap optimization with z buffer conjugation with pre-add from x and y input buffers using small X input buffer.

acc0 = -( cnj(z00)*(x00 + y00) + cnj(z01)*(x01 + y01) )
acc1 = -( cnj(z10)*(x10 + y10) + cnj(z11)*(x11 + y11) )
acc2 = -( cnj(z20)*(x20 + y20) + cnj(z21)*(x21 + y21) )
acc3 = -( cnj(z30)*(x30 + y30) + cnj(z31)*(x31 + y31) )
acc4 = y0uct_select << uct_shift )
acc5 = y1uct_select << uct_shift )
acc6 = y2uct_select << uct_shift )
acc7 = y3uct_select << uct_shift )

Returns: Returned accumulation vector (8 x cint48 lanes)

Parameters

xbuff	Input buffer of 16 elements of type cint16
xstart	Starting position offset applied to all lanes of input from X buffer.
xoffsets	4b offset for each lane, applied to both x and y buffers. LSB apply to first lane
xstep	Step between each column for selection in the x and y buffers. Ystep is symmetric to xstep (ystep advances by -xstep).
ybuff	Right input buffer of 16 elements of type cint16
ystart	Starting position offset applied to all lanes for input from Y buffer.
uct_col	Select which column of data from the Y buffer to upshift for the lower half of the output accumulator. This must be a compile time constant.
uct_shift	Upshift value to the four upshifted lanes
zbuff	Input buffer of 8 elements of type cint16
zstart	Starting position offset applied to all lanes for input from Z buffer. This must be a compile time constant. Only the 4 LSB of the argument are used.
zoffsets	4b offset for each lane, applied to input from Z buffer. LSB apply to first lane
zstep	Step between each column for selection in the zbuffer.

Note

For more information on how data selection works from the buffers go here. The data buffer and coefficient buffer in this intrinsic use the general scheme.
Parameter 'zstart' must be a compile time constant.

Overview

Functions

Function Documentation